Block 99% UV rays and stay up to 25°F cooler with lab-tested ceramic films installed by Tempe’s specialist shop. No purple fade, no peeling, just factory-clean lines and serious heat rejection built for the Arizona sun.
Same-week installs • Lifetime film warranty • ARIZ-compliant shades
99% UV rejection to protect your skin and interior
Advanced IR ceramics tuned for Tempe’s desert heat
Clean, microfiber-safe installation, no cut corners or gaps
Average cabin temps in Tempe parking lots regularly climb past 140°F. Our ceramic stacks are chosen specifically for high IR rejection, so your AC works less and your cabin cools faster.

Most tint shops talk about “percentage” and “shade.” We focus on measurable IR heat rejection and UV load, so your car stays cooler, your upholstery lasts longer, and your skin is protected on every Tempe commute.
All of our ceramic options block more than 99% of UVA and UVB. That’s dermatologist-grade protection for your skin and a major reduction in dashboard cracking and fading.
We specify films by infrared (IR) rejection, not just darkness. That’s the portion of the spectrum that actually drives cabin temperature up, and where premium ceramics outperform cheap dyed films by a wide margin.
We favor nano-ceramic stacks that stay color-stable and interference-free with cameras, GPS, and modern driver assist. You get deep, rich tones without sacrificing night visibility or safety systems.











Every option below is compliant when installed within Arizona’s legal limits. The difference is in infrared heat rejection, signal friendliness, and long-term optical clarity.
IR percentages listed are measured in the 900–1,000 nm range, where Tempe’s sun hits hardest. The higher the number, the cooler your cabin and the less your AC has to work.
Model 3 and Y glass is unique and unforgiving. We install the rear glass in a single continuous piece, not a stitched seam, to preserve factory sight lines and prevent stress points.
If you drive a Tesla, we recommend our Ultimate Nano-Ceramic package. In Tempe conditions, owners typically see a tangible reduction in HVAC usage and more consistent real-world range.
We’ve dialed in install patterns, squeegee paths, and heat-forming specifically for Tesla glass. That means fewer seams, zero contamination, and a finish that looks native to the car.

Arizona law requires at least 33% Visible Light Transmission (VLT) on the front driver and passenger windows. Rear doors and back glass can be darker, but front glass is where most tickets are written.
During your consult, we measure your existing glass and recommend a film stack that hits your comfort goal while respecting Arizona’s 33% VLT limit where it applies. You get a cooler cabin without inviting fix-it tickets.
Expert note: two films at “legal” percentages can stack into an illegal reading. We account for glass plus film and show you projected VLT before install.

Send us your Vehicle Year, Make, and Model, plus any notes about how you use the car. daily commute, rideshare, family hauler, or weekend toy. We’ll reply with a recommended film tier, shade options that respect Arizona laws, and a firm install estimate.
Most quotes returned same business day
Clear breakdown of Good / Better / Best options
No surprise shop fees. installation, cleanup, and warranty included
Include in your message:
We’ll confirm your appointment window, walk you through film choices, and answer any questions before you drive over.
Straightforward, technical answers so you can make a confident decision about your car—and your cabin comfort.
Exact numbers depend on your glass and shade choice, but compared to stock untinted glass you can expect a cabin that feels subjectively 15–25°F cooler after being parked in direct sun. More important, the interior cools down much faster once you start driving because the film is rejecting IR heat instead of letting it load into your dash, seats, and panels.
Our Carbon Series is non-metalized and signal-friendly, and both Ceramic IR and Ultimate Nano-Ceramic are engineered specifically to avoid RF and cellular interference. We avoid old-generation metalized films that can degrade signal strength, especially in Teslas and late-model vehicles packed with antennas.
Most sedans and small SUVs are completed in 2.5–4 hours. Larger SUVs and vehicles with complex glass (including Tesla one-piece rears) can run slightly longer. We’ll quote a realistic window based on your vehicle and film choice so you’re not sitting around guessing when the car will be ready.
All three tiers—Carbon Series, Ceramic IR, and Ultimate Nano-Ceramic—come with a manufacturer-backed lifetime warranty against bubbling, peeling, cracking, and color change, plus our shop workmanship guarantee. If something doesn’t look right, you bring it back and we make it right.
Tell us about your vehicle or home, and we’ll text or email back with a precise quote usually within 10 minutes during business hours.
Include year/make/model or home type, plus any photos of your glass for the most accurate pricing.
Or call/text: (480) 822-8000

© Copyright 2026. Tempe copperstate Tint. All Rights Reserved.